We provide You drive units for standard lifts for big goods lifts . On Your demand you can obtain our machines with the optimal suitable LiftEquip frequency inverters.
The Ideal Solution for Light Loads
VVVF-motor (5,2 and 7 kW) controlled accurately
Emergency braking system NBS, optional
Brake monitoring switch, manual brake release
Low-wear traction sheave, available in Ø 320, 360, 440, 520 or 590 mm
Gear, motor, traction sheave: approx. 250 kg
The Machine for Middle Loads
VVVF-motor (5,2 up to 13 kW) controlled accurately
Emergency braking system NBS, optional
Brake monitoring switch, manual brake release
Traction sheave in shaft with extended traction sheave shaft and pedestal bearing (SA 9)
Gear according to ATEX
Brake magnets, Ex-proof (SA 15)
Low-wear traction sheave, available in Ø 450, 510, 520, 590 or 675 mm
The Ideal Solution for Higher Loads
VVVF-motor (11 up to 42 kW) controlled accurately
Emergency braking system NBS, optional
Brake monitoring switch, manual brake release
Traction sheave in shaft with extended traction sheave shaft and pedestal bearing (SA 9)
Part-Ex proof: wall bearing with vapour-proof shaft duct, extended drive shaft and suitable machine base frame (SA4)
Reinforced machine mounting for rope pull resultant - horizontal or vertical pointing upwards (SA1)
Additional terminal block for intermediate terminal connection (SA12)
Gear according to ATEX
Brake magnets, Ex-proof (SA 15)
The Cart Horse for Higher Loads
VVF-motor (11 up to 42 kW) controlled accurately
Emergency braking system NBS, optional
Brake monitoring switch, manual brake release
Traction sheave in shaft with extended traction sheave shaft and pedestal bearing (SA 9)
Part-Ex proof: wall bearing with vapour-proof shaft duct, extended drive shaft and suitable machine base frame (SA4)
Gear according to ATEX
Brake magnets, Ex-proof (SA 15)
Low-wear traction sheave, available in Ø 640, 720 or 800 mm
Gear, motor, traction sheave: approx. 925 kg
The Well Proven for Higher, Big and Extreme Loads
VVVF-motor (16 up tp 75 kW) controlled accurately
Horizontal rope departure (SA1)
Brake monitoring switch, manual brake release
Traction sheave in shaft with extended traction sheave shaft and pedestal bearing (SA 9)
Part-Ex proof: wall bearing with vapour-proof shaft duct, extended drive shaft and suitable machine base frame (SA4)
Gear according to ATEX
Brake magnets, Ex-proof (SA 15)
Double safety by dual-circuit shoe brake
Low-wear traction sheave, available in Ø 640, 700, 740 or 800 mm
Gear, motor, traction sheave: approx. 1700 kg
An alternative for cramped manhole conditions
In case of tight spaces when no counterweight can be accommodated with the drive drum provides a solution.
The drives of the TW series with different drum diameters for a total load (F + Q) up to 2000 kg and max. 0.63 m / s (EN81-20) are used here. A drum drive is also a solution in the new installation and as a replacement of hydraulic systems.
For the implementation of UCM, the NBS safety device can be used according to EN 81-20/-50.
Address
Via Mercadante 33/A 20900 Monza(MB) ITALIA
C.F. e P.Iva: 12038830969
Tel. +39 0392209203
Tel. +39 3317868533
info@igi-it.com